Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
20 - 20000 Hz
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
3000 W
Bridge-mode power output per channel (4 Ohm):
1000 W
Bridge-mode power output per channel (8 Ohm):
1000 W
Signal-to-Noise Ratio (SNR):This is the ratio of signal intensity to noise intensity.
102 dB
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.4%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Peak power per channel:The maximum power (usually measued in watts) that can be transmitted through a channel.
500 W
Audio output channels:An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
8.0 channels
Display
Built-in display:A display which is part of the product, so you do not need to attach another display.
Indication
LED indicators:
Fault, Signal strength
Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging data
Package weight:Weight of the packaged product.
15.7 kg
Ports & interfaces
Connection to PC:Capability of connection product to PC.
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100 Mbit/s
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
Speakers connectivity type:The type of connection used for the speakers e.g. RCA connector.
Euroblock
Power
Maximum current:The greatest possible amount of current, which is a quantity representing the rate of flow of electric charge.
15 A
Power protection features:Features that protect the device against power problems e.g. overload.
DC offset, Over current, Over voltage, Overheating, Short circuit
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Technical details
Channels quantity:The number of channels the device has. There can be an individual input or output for each channel.
8 channels
Cooling type:The method used to cool the device or to cool the air around the device.
Active
Rack capacity:The spase that device fill in rack.
2U
Connectivity technology:
Wired
Purpose:What the product is used for.
Performance/stage
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
12.9 kg
Height:The measurement of the product from head to foot or from base to top.
88 mm
Depth:The distance from the front to the back of something.
525 mm
Width:The measurement or extent of something from side to side.
483 mm